18 Series LCD TV

menu with channel one. Manual Search

In TV mode, select Manual Search option and press OK/V+to enter into Manual Search. Use V+/V-to search programs. After searching, the TV will automatically store searched channels and return to the menu.

Fine

When the picture and sound of a channel are not satisfactory after Auto Search or Manual Search, Fine function can be used to adjust the pictures and sound.

1.In TV mode, select Fine and pressOK/V+to enter the Fine Tuning mode.

2.PressV+/V-to increase or decrease the frequency value for fine-tuning.

Note:

During auto search, manual search, and fine tune operation, a password needs to be entered if any program is locked.

Channel Table

Two kinds of program list Air & Cable to be chosen, 2~69 for Air list, and 1~125 for Cable list. Note: This function is for U.S.A users only.

Auto Scan

In TV mode, select Auto Scan to activate the scan mode. All pictures will be displayed in the current channel. The current program will be displayed in the middle of the screen, with twelve small pictures around the middle picture. All pictures are scanned, beginning with the current program, from the upper-left side screen in clockwise direction. Use P+/P-andV+/V-to select the desired channel; Use OKto exit from the Auto Scan mode and watch only the selected channel. UseMENUto exit from the Auto Scan mode directly. Note: There will be a stripe blank on the right side screen during Auto Scan, this situation is normal, for it is to better the viewing proportion.

Exchange

In TV mode, select Exchange to enter the PBP mode. Press V+/V-to switch between the main picture & sub-picture.

PressP+/P-or the number buttons to select between the channel 1& channel 2. PressOKto switch between the programs.

Using the Picture Setting Menu

1)PressMENUand then use V+/V-to select the Picture Setting menu. 2)PressP+/P-to select the desired field.

PAGE 13

Page 15
Image 15
Changhong Electric LT2618, LT3218, LT3718, LT4018 manual Using the Picture Setting Menu