Mazda Not a Manual manual Owner Maintenance

Maintenance and Care

Owner Maintenance

7. Remove the adapter.

8.Install the new bulb in the reverse order of the removal procedure.

Fog light bulbs

1.Make sure the ignition is switched off, and the headlight switch is off.

2.Turn the screws and the center section of the plastic retainers counterclockwise and remove them, then partially peel back the mudguard.

Removal

Installation

3.Disconnect the connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward.

4.Turn the socket and bulb assembly to remove it. Carefully remove the bulb from its socket in the reflector by gently pulling it straight backward out of the socket.

5.Install the new bulb in the reverse order of the removal procedure.

Front side-marker lights

1.Make sure the ignition is switched off, and the headlight switch is off.

8-41