Mazda Not a Manual manual QVoice recognition learning function Speaker enrollment

Interior Comfort

Bluetooth® Hands-Free

4.Say: [Beep] “Passcode”

5.Prompt:“Passcode is enabled. Would you like to disable it?”

6.Say: [Beep] “Yes”

7.Prompt:“Passcode is disabled, returning to main menu.”

Confirmation Prompts

The confirmation prompt confirms the command content to the user before advancing to the operation requested by the user. When this function is turned on, the system reads out the voice input command previously received and confirms whether the command is correct before advancing to the command execution.

When the confirmation prompt function is turned on:

(Ex. “Calling John's phone. Is this correct?”)

When the confirmation prompt function is turned off:

(Ex. “Calling John's phone.”)

NOTE

If the confirmation prompt function is turned off when making an emergency call, the system reads out and confirms the command before executing it.

1.Press the voice recognition/hands-free switch with a short press.

2.Say: [Beep] “Setup”

3.Prompt:“Select one of the following: pairing options, confirmation prompts, select phone, language, or passcode..., or say “cancel” to return to main menu.”

4.Say: [Beep] “Confirmation prompts”

5.Prompt:“Confirmation prompts are on/off. Would you like to turn confirmation prompts off/on?”

6.Say: [Beep] “Yes”

7.Prompt:“Confirmation prompts are off/on, returning to main menu.”

qVoice recognition learning function (Speaker enrollment)

The voice recognition learning function enables voice recognition appropriate to the characteristics of the user's voice.

If the recognition of the voice input commands to the system is not adequate, this function can largely improve the system's voice recognition of the user. If your voice can be recognized sufficiently without using this function, you may not realize the added benefit of the function. To register your voice, the voice input command list must be read out. Read out the list when the vehicle is parked. Perform the registration in as quiet a place as possible (page 6-64).

The registration must be performed completely. The required time is a few minutes. The user needs to be seated in the driver's seat with the voice input command list for voice recognition learning open to the page indicated below.

1.Press the voice recognition/hands-free switch with a short press.

2.Say: [Beep] “Voice training”

3.Prompt: “This operation must be performed in a quiet environment while the vehicle is stopped. See the owner's manual for the list of required training phrases. Press and release the phone button when you are ready to begin. Press and hold the phone button to cancel at any time.”

6-77