Mazda Not a Manual manual Owner Maintenance

Maintenance and Care

Owner Maintenance

Reverse lights

Brake lights/Taillights

9.Install the new bulb in the reverse order of the removal procedure.

High-mount brake light

Due to the complexity and difficulty of the procedure, the LED bulbs must be replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible because it is built into the unit. Replace the unit.

License plate lights

1.Make sure the ignition is switched off, and the headlight switch is off.

2.Lift the trunk.

3.Slide the light to the left side of the vehicle and remove it.

4.Turn the socket and bulb assembly counterclockwise and remove it.

5.Disconnect the bulb from the socket.

6.Install the new bulb in the reverse order of the removal procedure.

8-45