In Case of an Emergency

Flat Tire

NOTE

The tire sealant can be used at outside temperatures down to _30°C (_22°F).

In extremely cold temperatures (0°C (32°F) or below), the tire sealant hardens easily and injection of the sealant will be difficult. Warm the sealant inside the vehicle before doing the injection work.

6.Remove the cap from the bottle. Screw on the injection hose with the bottle's inner cap left on to break the inner cap.

Injection hose

Bottle

7.Remove the valve cap from the flat tire. Press the back of a valve core tool to the core of the tire valve and bleed all the remaining air.

Valve

CAUTION

If there is air remaining in the tire when the valve core is removed, the valve core could fly out. Remove the valve core carefully.

8.Turn the valve core counterclockwise with the valve core tool and remove the valve core.

Valve

Valve core

NOTE

Store the valve core in a place where it won't get dirty.

9.Remove the plug from the injection hose and insert the injection hose into the valve.

Plug

Valve cap

Injection hose

Valve core tool

7-9

Page 309
Image 309
Mazda Not a Manual manual Store the valve core in a place where it wont get dirty