Mazda Not a Manual manual Bluetooth Hands-Free

Interior Comfort

Bluetooth® Hands-Free

9.Say: [Beep] “XXXX” (Speak an arbitrary 4-digit pairing code. This can be any combination of 4 numbers.)

NOTE

lSome devices accept only a particular pairing code (Usually, “0000” or “1234”). If pairing cannot be completed, refer to the owner's manual of your mobile device, and

try those numbers if necessary.

lRecord the code as it will be used to program your phone in Step 16.

10.Prompt: “Pairing code XXXX (4- digit number). Is this correct?”

11.Say: [Beep] “Yes” or “No”

12.If “Yes”, go to Step 13.

If “No”, the procedure returns to Step 8.

13.Prompt: “Start pairing procedure on phone. See phone's manual for instructions.”

14.Using the mobile telephone, perform a search for the Bluetooth® device (Peripheral device).

NOTE

For the operation of the mobile telephone, refer to its instruction manual.

15.Select “Mazda” from the device list searched by the mobile phone.

16.Input the 4-digit pairing code set in Step 9 to the mobile telephone.

17.Prompt: “Please say the name of the phone after the beep.”

18.Say: [Beep] “XXXX - - -”(Speak a “phone tag”, an arbitrary name for the phone.)

Example: “Stan's phone.”

NOTE

Speak a programmed “phone tag” within 10 seconds.

If more than two mobile telephones are to be programmed, they cannot be programmed with the same or similar “phone tag”.

19.Prompt: “Adding XXXXXX - - -

(Ex. “Stan's phone”) (Phone tag). Is this correct?”

20.Say: [Beep] “Yes”

21.Prompt: “Assign a priority for this phone between 1 and 7, where 1 is the phone used most often.”

22.Say: [Beep] “1” (Speak a number of the desired priority from 1 to 7.)

NOTE

lNormally, “1” is to be input (Highest

priority).

lIf more than two mobile telephones are registered, input the priority order from 1 to 7.

23.Prompt: “XXXXXX - - - (Ex.

“Stan's phone”) (Phone tag) set to priority X (Priority number). Is this correct?”

24.Say: [Beep] “Yes”

25.Prompt: “Pairing complete”

After a mobile telephone is registered, the system automatically identifies the phone. By pressing the voice recognition/hands- free switch again, or by pressing the voice recognition/hands-free switch first after switching the ignition from OFF to ACC, the system reads out a voice guidance, “XXXXXX - - - (Ex. “Stan's phone”) (Phone tag) is connected”. If two or more telephones are registered, the one with the highest priority is selected.

6-67