Mazda Not a Manual manual Jack, Turn the wing bolt completely to secure the jack

In Case of an Emergency

Flat Tire

qJack

To remove the jack

1. Turn the knob and remove the cover.

2.Turn the wing bolt and jack screw counterclockwise.

Wing bolt

Jack screw

To secure the jack

1.Insert the wing bolt into the jack with the jack screw pointing back and turn the wing bolt clockwise to temporarily tighten it.

2.Turn the jack screw in the direction shown in the figure.

Wing bolt

Jack screw

3.Turn the wing bolt completely to secure the jack.

NOTE

If the jack is not completely secured, it could rattle while driving. Make sure the jack screw is sufficiently tightened.

Maintenance

lAlways keep the jack clean.

lMake sure the moving parts are kept free from dirt or rust.

lMake sure the screw thread is adequately lubricated.

7-6