
Interior Comfort
Audio System
NOTE
lIf an ID code is not input for ten seconds, “Err” is displayed and it returns to the
former display.
lChannel preset buttons 1, 2, 3, 4 and the
scan button ( ) are used for input of the ID code. Buttons 5 and 6 cannot be used.
Lock cancellation
Setting condition: SAT mode
(Releasing a locked channel)
1.Select a channel to be released by turning the manual tuning dial. Example: Select the locked channel (i.e. 100). At this time,
“SR1 LOCK 100” is displayed.
(Registered ID code input preparation)
2.Press and hold the scan button ( ), then press channel preset button 6. Hold both buttons together for 1.5 seconds.
3.“ENTER PIN” appears for three seconds which indicates that it is in code input mode.
4.“SR1 - - -
(Registered ID code input)
5.Input the registered ID code using channel preset buttons
NOTE
If “Err” is displayed, go to the
“INITIALIZATION OF ID CODE” section to reset the ID code to [0000].
(Registered ID code input determination)
6.Determine the input code by pressing
the scan button ( ).
7.If it does not match the registered code, “SR1 Err” is displayed and then it returns to “SR1 - - -
8.If it matches the registered code, “SR1 UNLOCK” appears for three seconds which indicates that the code input has been completed.
9.“SR1 100” appears which indicates that the parental lock is off. At this time, sound is heard.
NOTE
lIf an ID code is not input for ten seconds, “Err” is displayed and it returns to the former display.
lChannel preset buttons 1, 2, 3, 4 and the
scan button ( ) are used for input of the ID code. Buttons 5 and 6 cannot be used.