Parts List
Parts No. | Description | Qty. | Parts No. | Description | Qty |
1 | Screw | 3 | 20* | Washer | 1 |
2 | Motor Cover | 1 | 21* | Bearing | 1 |
3 | Power Cord | 1 | 22* | Swing Arm | 1 |
4 | Top Housing | 1 | 23* | Chain Stop | 1 |
5 | Switch Plate | 1 | 24* | Tension Spring | 1 |
6 | Lock Stop | 1 | 25* | Retaining Ring | 1 |
7 | Grinding Wheel Base | 1 | 26* | Lower Knob | 1 |
8 | Grinding Wheel | 1 | 27* | Screw | 1 |
9 | Grinder Lock Cap | 1 | 28* | Bolt | 1 |
10 | Screw | 2 | 29* | Chain Saw Frame | 1 |
11 | Grinding Wheel Cover | 1 | 30* | Square Neck Screw | 2 |
12 | 2 | 31* | Sliding Guide | 2 | |
13 | Punching Axis | 1 | 32* | Pad | 2 |
14 | Torsion Spring | 1 | 33* | Screw | 1 |
15 | Switch Circuit Board | 1 | 34* | Handle | 1 |
16 | Nut | 1 | 35* | Spring | 1 |
17 | Base | 1 | 36* | Lock Screw | 1 |
18 | Lock Wheel | 1 | 37 | Retaining Ring(10) | 2 |
19* | Screw | 1 | 38 | Motor | 1 |
The Chain Mounting Assembly ( #39) is only available as a set. It includes all part numbers with asterisks(*). Part numbers with asterisks ( 19 through 36)a re not available individually.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURE AND/OR DISTRIIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER.THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO.OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
Page 9
