Mazda Not a Manual manual Audio System

Interior Comfort

Audio System

lTo display the rest of the characters of the composer's name, press and hold

the text button ( ). The display scrolls the next ten characters. Press

and hold the text button ( ) again after the last ten characters have been

displayed to return to the beginning of the title.

lThree seconds after scrolling the text,

the display automatically returns to display the first part of the text.

lIf there is no composer name, “NO INFO” is displayed.

Instant replay

This function allows you to rewind and replay the program that you were previously or are currently listening to. Press the instant replay button ( ). When the seek tuning button ( ) is pressed (about 1.5 seconds), playback starts from the beginning of the current program.

When the seek tuning button ( ) is pressed twice, playback starts from the beginning of the previous program. When the seek tuning button ( ) is pressed for about 1.5 seconds or longer, the program is reversed while the button is being pressed.

When the seek tuning button ( ) is pressed (about 1.5 seconds), playback starts from the beginning of the next program. When the seek tuning button ( ) is pressed (about 1.5 seconds) while the last program is being played, the instant replay mode is cancelled.

When the seek tuning button ( ) is pressed for 1.5 seconds or longer, the program is fast-forwarded while the button is being pressed. When pressing and holding the button until the end of the program, the instant replay mode is cancelled.

When the instant replay button ( ) is pressed again, playback is paused, or playback starts if it has been paused. Instant replay (PAUSE)

If the instant replay button ( ) is pressed while the instant replay mode is off, instant replay mode is turned on in a paused condition (PAUSE). Press the instant replay button ( ) again to resume playback from the point at which it was paused.

NOTE

lIf the channel is changed, the instant replay

buffer data is deleted.

lAfter turning on the power and switching to SIRIUS digital satellite radio mode, the instant replay mode is not available for several seconds after changing channels.

Initialization of ID code

If the registered ID code is forgotten, return the ID code to the default [0000] by performing the following steps:

Setting condition: SAT mode

(Master code input preparation)

1.Press and hold the scan button ( ), then press channel preset button 4. Hold both buttons together for 1.5 seconds.

2.“ENTER PIN” appears for three seconds which indicates that it is in code input mode.

3.“SR1 - - - -”appears, which indicates that it is ready for code input.

(Master code input)

4.Input the master code using the channel preset buttons 1-4.

(The master code is already set at the time of factory shipment.)

6-41