Setting Change Function Customization, Sound*1

Knowing Your Mazda

Setting Change (Function Customization)

The following function settings are possible. These settings can only be changed by an Authorized Mazda Dealer.

Setting	Function	At Initial Setting	After Setting
Setting	Function	At Initial Setting	Change
			Change
Advanced key battery	KEY indicator light (green) flashes to indicate	Activated	Deactivated
dead indicator	that the advanced key battery power is low.	Activated	Deactivated
dead indicator	that the advanced key battery power is low.

Lock/unlock operation	A beep sound is heard to confirm that both doors
confirmation beep	or the trunk lid have been locked/unlocked.	Activated	Deactivated
sound*1
	When both doors are closed and the advanced key
	is being carried and out of operational range, both
Auto-lock function*2	the doors automatically lock after three seconds.	Deactivated	Activated
	(Even if the driver is in the operational range,
	both doors are locked automatically after about 30
	seconds.)

*1: When the auto-lock function is operating, the warning sound will be heard regardless of the setting.

*2: When the auto-lock function is enabled, windows will not automatically close. You must close them before leaving vehicle.

3-21