NETGEAR UTM5-100NAS, UTM50-100NAS Description or Subfield and Description Add SSL VPN Policies

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 8-10. Add Policy Settings (continued)

Item

Description (or Subfield and Description)

Add SSL VPN Policies

Apply	Select one of the following radio buttons to specify how the policy is applied:
Policy For	• Network Resource. The policy is applied to a network resource that you have defined
	on the Resources screen (see “Using Network Resource Objects to Simplify Policies” on
	page 8-28). The screen adjust to unmask the fields that are shown in the Network
	Resource fields below.
	• IP Address. The policy is applied to a single IP address. The screen adjust to unmask
	the fields that are shown in the IP Address fields below.
	• IP Network. The policy is applied to a network address. The screen adjust to unmask
	the fields that are shown in the IP Network fields below.
	• All Addresses. The policy is applied to a all address. The screen adjust to unmask the
	fields that are shown in the All Addresses fields below.
	Network	Policy Name	A descriptive name of the SSL VPN policy for identification
	Resource		and management purposes.
		Defined	From the pull-down menu, select the network resource that
		Resources	you have defined on the Resources screen (see “Using
			Network Resource Objects to Simplify Policies” on
			page 8-28).
		Permission	From the pull-down menu, select whether the policy permits
			(PERMIT) or denies (DENY) access.
	IP Address	Policy Name	A descriptive name of the SSL VPN policy for identification
			and management purposes.
		IP Address	The IP address to which the SSL VPN policy is applied.
		Port Range /	A port (enter in the Begin field) or a range of ports (enter in
		Port Number	the Begin and End fields) to which the SSL VPN policy is
			applied. Ports can be 0 through 65535. The policy is applied
			to all TCP and UDP traffic that passes on those ports. Leave
			the fields blank to apply the policy to all traffic.
		Service	From the pull-down menu, select the service to which the
			SSL VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the pull-down menu, select whether the policy permits
			(PERMIT) or denies (DENY) access.

Virtual Private Networking Using SSL Connections 8-35

v1.0, January 2010