NETGEAR UTM5-100NAS, UTM50-100NAS manual Traffic Metering Logs, Unicast Logs, Icmp Redirect Logs

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Traffic Metering Logs

This section describes logs that are generated when the traffic meter has reached a limit.

Table C-13. System Logs: Traffic Metering

Message	Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of
	10 MB has reached for WAN1._
Explanation	Logs that are generated when the traffic limit for WAN1 interface that was set at
	10 MB has been reached. Depending on the setting that is configured in the
	“When Limit is reached” section on the WAN1 Traffic Meter screen (see
	“Enabling the WAN Traffic Meter” on page 11-1), all the incoming and outgoing
	traffic might be stopped.
	Note: For WAN2 interface, see the settings on the WAN2 Traffic Meter screen.
Recommended Action	To start the traffic, restart the traffic counter in the “Traffic Counter” section on
	the WAN1 Traffic Meter screen.
	Note: For WAN2 interface, see the settings on the WAN2 Traffic Meter screen.

Unicast Logs

This section describes logs that are generated when the UTM processes unicast packets.

Table C-14. System Logs: Unicast

Message	Nov 24 11:52:55 [UTM] [kernel] UCAST IN=SELF OUT=WAN
	SRC=192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
Explanation	• This unicast packet is destined to the device from the WAN network.
	• For other parameters, see Table C-1.
Recommended Action	None

ICMP Redirect Logs

This section describes logs that are generated when the UTM processes ICMP Redirect messages.

Table C-15. System Logs: Unicast, Redirect

Message	Feb 2007 22 14:36:07 [UTM] [kernel] [LOG_PACKET] SRC=192.168.1.49
	DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
Explanation	• This packet is an ICMP Redirect message sent to the device by another
	device.
	• For other parameters, see Table C-1.
Recommended Action	None

System Logs and Error Messages C-9

v1.0, January 2010