NETGEAR UTM50-100NAS, UTM5-100NAS manual Configuring the Client IP Address Range

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

•If you enable split tunnel support and you assign an entirely different subnet to the VPN tunnel clients than the subnet that is used by the local network, you must add a client route to ensure that a VPN tunnel client connects to the local network over the VPN tunnel.

Configuring the Client IP Address Range

First determine the address range to be assigned to VPN tunnel clients, then define the address range.

To define the client IP address range:

1.Select VPN > SSL VPN from the menu. The SSL VPN s submenu tabs appear, with the Policies screen in view.

2.Click the SSL VPN Client submenu tab. The SSL VPN Client screen displays.

Figure 8-15

8-26 Virtual Private Networking Using SSL Connections

v1.0, January 2010