NETGEAR UTM50-100NAS, UTM5-100NAS manual Gateway Tunnel

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 7-17. Security Policy Editor: Remote Party, Mode Config Settings (continued)

Setting	Description (or Subfield and Description)
Use	Select the Use checkbox. Then, from the pull-down menu, select Secure
	Gateway Tunnel.
	Left pull-down menu	From the left pull-down menu, select Domain Name.
		Then, below, enter the local FQDN that you specified
		in the UTM’s Mode Config IKE policy. In this example,
		we are using utm25_local.com.
	Right pull-down menu	From the right pull-down menu, select Gateway IP
ID Type		Address. Then, below, enter the IP address of the
		WAN interface that you selected on the UTM’s VPN
		Wizard screen (see Figure 7-9 on page 7-10). In this
		example, the WAN IP address is 192.168.50.61.
		Note: You can find the WAN IP address on the
		Connection Status screen for the selected WAN port.
		For more information, see “Viewing the WAN Ports
		Status” on page 11-27.

4.Click on the disk icon to save the configuration, or select File > Save from the Security Policy Editor menu.

7-52 Virtual Private Networking Using IPsec Connections

v1.0, January 2010