NETGEAR UTM50-100NAS, UTM5-100NAS manual Configuring and Activating System, E-mail, and Syslog Logs

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

2.Enter the settings as explained in Table 11-2.

Table 11-2. E-mail Notification Settings

Setting	Description (or Subfield and Description)
Show as mail sender	A descriptive name of the sender for e-mail identification
	purposes. For example, enter UTMnotification@netgear.com.
SMTP server	The IP address and port number or Internet name and port
	number of your ISP’s outgoing e-mail SMTP server. The default
	port number is 25.
	Note: If you leave this field blank, the UTM cannot send e-mail
	notifications.
This server requires authentication	If the SMTP server requires authentication, select the This
	server requires authentication checkbox and enter the
	following settings:
	User name	The user name for SMTP server authentication.
	Password	The password for SMTP server authentication.
Send notifications to	The email address to which the notifications should be sent.
	Typically, this is the e-mail address of the administrator.

3.Click Test to ensure that the connection to the server and e-mail address succeeds.

4.Click Apply to save your settings.

Configuring and Activating System, E-mail, and Syslog Logs

You can configure the UTM to log system events such as a change of time by an NTP server, secure login attempts, reboots, and other events. You can also send logs to the administrator or schedule logs to be sent to the administrator or to a syslog server on the network. In addition, the Email and Syslog screen provides the option to selectively clear logs.

To configure and activate logs:

1.Select Monitoring > Logs & Reports from the menu. The Logs & Reports submenu tabs appear, with the Email and Syslog screen in view (see Figure 11-4 on page 11-7).

11-6 Monitoring System Access and Performance

v1.0, January 2010