NETGEAR UTM5-100NAS, UTM50-100NAS manual Adding Servers and Port Numbers

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Adding Servers and Port Numbers

To configure port forwarding, you must define the IP addresses of the internal servers and the port number for TCP applications that are available to remote users.

To add a server and a port number:

1.Select VPN > SSL VPN from the menu. The SSL VPN s submenu tabs appear, with the Policies screen in view.

2.Click the Port Forwarding submenu tab. The Port Forwarding screen displays. (Figure 8-14shows some examples.)

Figure 8-14

3.In the Add New Application for Port Forwarding section of the screen, specify information in the following fields:

•IP Address. The IP address of an internal server or host computer that a remote user has access to.

•TCP Port. The TCP port number of the application that is accessed through the SSL VPN tunnel. Table 8-7 on page 8-24lists some commonly used TCP applications and port numbers.

Virtual Private Networking Using SSL Connections 8-23

v1.0, January 2010