NETGEAR UTM50-100NAS, UTM5-100NAS manual Menu

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 7-18. Security Policy Editor: My Identity, Mode Config Settings (continued)

Setting	Description (or Subfield and Description)
ID Type	From the pull-down menu, select Domain Name. Then, below, enter the
	remote FQDN that you specified in the UTM’s Mode Config IKE policy. In this
	example, we are using utm25_remote.com.
Secure Interface	Select Preferred from the Virtual Adapter pull-down menu.
Configuration
Internet Interface	Leave the default setting, which is the Any selection from the Name pull-down
	menu.

7.Click on the disk icon to save the configuration, or select File > Save from the Security Policy Editor menu.

8.In the left frame, click Security Policy. The screen adjusts.

Figure 7-30

7-54 Virtual Private Networking Using IPsec Connections

v1.0, January 2010