NETGEAR UTM50-100NAS manual Additional WAN-Related Configuration Tasks, Upload/Download Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 3-8. Advanced WAN Settings (continued)

Setting	Description (or Subfield and Description)
Use this MAC Address	Select the Use this MAC Address radio button to manually enter the
	MAC address in the field next to the radio button. You would typically enter
	the MAC address that your ISP is requiring for MAC authentication.
	Note: The format for the MAC address is 01:23:45:67:89:AB (numbers 0-9
	and either uppercase or lowercase letters A-F). If you enter a MAC
	address, the existing entry is overwritten.

Upload/Download Settings

These settings rate-limit the traffic that is being forwarded by the UTM.

WAN Connection Type	From the pull-down menu, select the type of connection that the UTM uses
	to connect to the Internet: DSL, ADLS, Cable Modem, T1, T3, or Other.
WAN Connection Speed	From the pull-down menu, select the maximum upload speed that is
Upload	provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can
	select Custom and enter the speed in Kbps in the field to the right.
WAN Connection Speed	From the pull-down menu, select the maximum download speed that is
Download	provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can
	select Custom and enter the speed in Kbps in the field to the right.

4.Click Apply to save your changes.

Note: Depending on the changes that you make, when you click Apply, the UTM might restart, or services such as HTTP and SMTP might restart.

Note: For dual-WAN port models only, to configure advanced WAN options for WAN2 port, select Network Config > WAN Settings from the menu. The WAN Settings tabs appear, with the WAN1 ISP Settings screen in view. Now, click the WAN2 ISP Settings tab and then the Advanced option arrow. The WAN2 Advanced Options screen displays.

Additional WAN-Related Configuration Tasks

•If you want the ability to manage the UTM remotely, enable remote management (see “Configuring Remote Management Access” on page 10-12). If you enable remote management, NETGEAR strongly recommend that you change your password (see “Changing Passwords and Administrator Settings” on page 10-9).

•You can set up the traffic meter for each WAN, if desired. See “Enabling the WAN Traffic Meter” on page 11-1.

3-24 Manually Configuring Internet and WAN Settings

v1.0, January 2010