NETGEAR UTM50-100NAS, UTM5-100NAS manual Logging In to the UTM, Qualified Web Browsers

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Qualified Web Browsers

To configure the UTM, you must use a Web browser such as Microsoft Internet Explorer 6 or higher, Mozilla Firefox 3 or higher, or Apple Safari 3 or higher with JavaScript, cookies, and you must have SSL enabled.

Although these web browsers are qualified for use with the UTM’s Web Management Interface, SSL VPN users should choose a browser that supports JavaScript, Java, cookies, SSL, and ActiveX to take advantage of the full suite of applications. Note that Java is only required for the SSL VPN portal, not for the Web Management Interface.

Logging In to the UTM

To connect to the UTM, your computer needs to be configured to obtain an IP address automatically from the UTM via DHCP. For instructions on how to configure your computer for DHCP, see the document that you can access from “Preparing Your Network” in Appendix E.

To connect and log in to the UTM:

1.Start any of the qualified Web browsers, as explained in “Qualified Web Browsers” on this page.

2.Enter https://192.168.1.1 in the address field. The NETGEAR Configuration Manager Login screen displays in the browser (see Figure 2-1 on page 2-3, which shows a dual-WAN port model, the UTM25).

Note: The UTM factory default IP address is 192.168.1.1. If you change the IP address, you must use the IP address that you assigned to the UTM to log in to the UTM.

2-2 Using the Setup Wizard to Provision the UTM in Your Network

v1.0, January 2010