NETGEAR UTM5-100NAS, UTM50-100NAS manual V1.0, January

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Note these restrictions on port triggering:

•Only one PC can use a port triggering application at any time.

•After a PC has finished using a port triggering application, there is a short time-out period before the application can be used by another PC. This time-out period is required so the UTM can determine that the application has terminated.

Note: For additional ways of allowing inbound traffic, see “Inbound Rules (Port Forwarding)” on page 5-6.

To add a port triggering rule:

1.Select Network Security > Port Triggering from the menu. The Port Triggering screen displays. (Figure 5-28shows a rule in the Port Triggering Rule table as an example.)

Figure 5-28

2.Below Add Port Triggering Rule, enter the settings as explained in Table 5-10 on page 5-48.

Firewall Protection 5-47

v1.0, January 2010