NETGEAR UTM50-100NAS, UTM5-100NAS manual LAN DMZ Outbound Services Rules

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

•Up. Moves the rule up one position in the table rank.

•Down. Moves the rule down one position in the table rank. To delete or disable one or more rules:

1.Select the checkbox to the left of the rule that you want to delete or disable or click the Select All table button to select all rules.

2.Click one of the following table buttons:

•Disable. Disables the rule or rules. The “!” status icon changes from a green circle to a grey circle, indicating that the rule is or rules are disabled. (By default, when a rule is added to the table, it is automatically enabled.)

•Delete. Deletes the rule or rules.

LAN DMZ Outbound Services Rules

You may change the default outbound policy or define rules that specify exceptions to the default outbound policy. By adding custom rules, you can block or allow access based on the service or application, source or destination IP addresses, and time of day. An outbound rule may block or allow traffic between the DMZ and any internal LAN IP address according to the schedule created in the Schedule menu.

To create a new outbound LAN DMZ service rule:

1.In the LAN DMZ Rules screen, click the Add table button under the Outbound Services table. The Add LAN DMZ Outbound Service screen displays.

Figure 5-9

5-20 Firewall Protection

v1.0, January 2010