NETGEAR UTM50-100NAS, UTM5-100NAS manual Web Protocol, Instant Messaging, and Peer-to-Peer Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Figure 6-7

2.Enter the settings as explained in Table 6-5.

Table 6-6. Web Protocol, Instant Messaging, and Peer-to-Peer Settings

Setting	Description (or Subfield and Description)
Web
HTTP	Select the HTTP checkbox to enable Hypertext Transfer Protocol (HTTP)
	scanning. This service is enabled by default and uses default port 80.
HTTPS	Select the HTTPS checkbox to enable Hypertext Transfer Protocol over Secure
	Socket Layer (HTTPS). This service is disabled by default. The default port
	is 443.
FTP	Select the FTP checkbox to enable File Transfer Protocol (FTP). This service is
	enabled by default and uses default port 21.

6-20 Content Filtering and Optimizing Scans

v1.0, January 2010