NETGEAR UTM50-100NAS, UTM5-100NAS manual Inbound Rules Overview, Customized Services on

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

.

Table 5-3. Inbound Rules Overview

Setting	Description (or Subfield and Description)
Service	The service or application to be covered by this rule. If the service or application does
	not appear in the list, you must define it using the Services menu (see “Adding
	Customized Services” on page 5-32).
Action (Filter)	The action for outgoing connections covered by this rule:
	• BLOCK always.
	• BLOCK by schedule, otherwise allow.
	• ALLOW always.
	• ALLOW by schedule, otherwise block.
	Note: Any inbound traffic that is not blocked by rules you create is allowed by the
	default rule.
Select Schedule	The time schedule (that is, Schedule1, Schedule2, or Schedule3) that is used by this
	rule.
	• This pull-down menu is activated only when “BLOCK by schedule, otherwise allow”
	or “ALLOW by schedule, otherwise block” is selected as the Action.
	• Use the schedule screen to configure the time schedules (see “Setting a Schedule
	to Block or Allow Specific Traffic” on page 5-41).
Send to LAN Server	The LAN server address determines which computer on your network is hosting this
	service rule. (You can also translate this address to a port number.)
Send to DMZ Server	The DMZ server address determines which computer on your network is hosting this
	service rule. (You can also translate this address to a port number.)
Translate to Port	You can enable this setting and specify a port number if you want to assign the LAN
Number	server or DMZ server to a specific port.
WAN Destination IP	The setting that determines the destination IP address applicable to incoming traffic.
Address	This is the public IP address that maps to the internal LAN server.
	On the dual-WAN port models, it can either be the address of the WAN1 or WAN2
	interface or another public IP address (when you have a secondary WAN address
	configured). On the single-WAN port models, it can either be the address of the
	single WAN interface or another public IP address (when you have a secondary WAN
	address configured).

5-8 Firewall Protection

v1.0, January 2010