NETGEAR UTM50-100NAS, UTM5-100NAS manual Total Threats, Settings on, System on

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

To clear the statistics, click Clear Statistics.

To set the poll interval:

1.Click the Stop button.

2.From the Poll Interval pull-down menu, select a new interval (the minimum is 5 seconds, the maximum is 5 minutes).

3.Click the Set Interval button.

Table 11-6explains the fields of the Total Threats, Threats (Counts), and Total Traffic (Bytes) sections of the Dashboard screen.

Table 11-6. Dashboard: Total Threats, Threats (Counts), and Total Traffic (Bytes) Information

Item	Description (or Subfield and Description)
Total Threats
Emails	Displays the total number of:
	• Scanned e-mails.
	• Viruses detected (to configure, see “Customizing E-mailAnti-Virus and Notification
	Settings” on page 6-5).
	• E-mails that matched filters (to configure, see “E-mail Content Filtering” on page 6-8).
	• Spam (to configure, see “Protecting Against E-mail Spam” on page 6-11).
Web	Displays the total number of:
	• Files scanned.
	• Malware detected (to configure, see “Configuring Web Malware Scans” on page 6-21).
	• Files blocked (to configure, see “Configuring Web Content Filtering” on page 6-23).
	• URLs blocked (to configure, see “Configuring Web URL Filtering” on page 6-30).

IM/Peer to Peer Displays the total number of:

•Instant Messaging blocked (to configure, see “Customizing Web Protocol Scan Settings and Services” on page 6-19).

•Peer to Peer blocked (to configure, see “Customizing Web Protocol Scan Settings and Services” on page 6-19).

Network	Displays the total number of:
	• IPS attack signatures matched (to configure, see “Using the Intrusion Prevention
	System” on page 5-49).
	• Port scans detected (to configure, see “Using the Intrusion Prevention System” on
	page 5-49).

11-16 Monitoring System Access and Performance

v1.0, January 2010