NETGEAR UTM50-100NAS, UTM5-100NAS manual Setting Description or Subfield and Description

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 2-1. Setup Wizard Step 1: LAN Settings (continued)

Setting	Description (or Subfield and Description)
Enable DHCP Server	Primary DNS	This is optional. If an IP address is specified, the UTM provides
(continued)	Server	this address as the primary DNS server IP address. If no
		address is specified, the UTM provides its own LAN IP address
		as the primary DNS server IP address.
	Secondary	This is optional. If an IP address is specified, the UTM provides
	DNS Server	this address as the secondary DNS server IP address.
	WINS Server	This is optional. Enter a WINS server IP address to specify the
		Windows NetBios server, if one is present in your network.
	Lease Time	Enter a lease time. This specifies the duration for which IP
		addresses are leased to clients.
DHCP Relay	Select the DHCP Relay radio button to use the UTM as a DHCP relay agent for
	a DHCP server somewhere else on your network. Enter the following setting:
	Relay	The IP address of the DHCP server for which the UTM serves
	Gateway	as a relay.
Enable LDAP information	Select the Enable LDAP information checkbox to enable the DHCP server to
	provide Lightweight Directory Access Protocol (LDAP) server information. Enter
	the settings below.
	Note: The LDAP settings that you specify as part of the VLAN profile are used
	only for SSL VPN and UTM authentication, but not for Web and e-mail security.
	LDAP Server	The IP address or name of the LDAP server.
	Search Base	The search objects that specify the location in the directory
		tree from which the LDAP search begin. You can specify
		multiple search object, separated by commas. The search
		objects include:
		• cn (for common name)
		• ou (for organizational unit)
		• o (for organization)
		• c (for country)
		• dc (for domain)
		For example, to search the Netgear.net domain for all last
		names of Johnson, you would enter:
		cn=Johnson,dc=Netgear,dc=net
	port	The port number for the LDAP server. The default setting is
		zero.

2-10 Using the Setup Wizard to Provision the UTM in Your Network

v1.0, January 2010