NETGEAR UTM5-100NAS, UTM50-100NAS manual Protocol Binding Settings Dual-WAN Port Models Only

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Figure 3-9

a.Figure 3-9shows one example in the Protocol Binding table. Configure the protocol binding settings as explained in Table 3-6.

Table 3-6. Protocol Binding Settings (Dual-WAN Port Models Only)

Setting	Description (or Subfield and Description)
Add Protocol Binding
Service	From the pull-down menu, select a service or application to be covered by this
	rule. If the service or application does not appear in the list, you must define it
	using the Services menu (see “Services-Based Rules” on page 5-3).
Source Network	The source network settings determine which computers on your network are
	affected by this rule. Select one of the following options from the pull-down
	menu:
	Any	All devices on your LAN.
	Single address	In the Start Address field, enter the IP address to which the
		rule is applied.
	Address range	In the Start Address field and End Address field, enter the
		IP addresses for the range to which the rule is applied.

Manually Configuring Internet and WAN Settings 3-15

v1.0, January 2010