NETGEAR UTM50-100NAS, UTM5-100NAS manual V1.0, January

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

To add a secondary WAN address to a WAN port:

1.Select Network Config > WAN Settings from the menu. On a dual-WAN port model, the WAN Settings submenu tabs appear with the WAN1 ISP Settings screen in view. On a single WAN model, the WAN Settings submenu tabs appear with the WAN ISP Settings screen in view.

2.Click the Secondary Addresses option arrow. On a dual-WAN port model, the WAN1 Secondary Addresses screen displays (see Figure 3-10, which shows some examples in the List of Secondary WAN addresses table). On a a single-WAN port model, the WAN Secondary Addresses screen displays.

Figure 3-10

The List of Secondary WAN addresses table displays the secondary LAN IP addresses added to the UTM.

3.In the Add WAN1 Secondary Addresses section (dual-WAN port models) or Add WAN Secondary Addresses section of the screen (single-WAN port models), enter the following settings:

•IP Address. Enter the secondary address that you want to assign to WAN1 port (dual- WAN port models) or to the single WAN port (single-WAN port models).

•Subnet Mask. Enter the subnet mask for the secondary IP address.

4.Click the Add table button in the rightmost column to add the secondary IP address to the List of Secondary WAN addresses table.

Repeat step 3 and step 4 for each secondary IP address that you want to add to the List of Secondary WAN addresses table.

3-18 Manually Configuring Internet and WAN Settings

v1.0, January 2010