Audiovox ACD85 manual Setting the Clock, CD Player Error Codes, SET ING Clock Error Codes

	DISC EJECT	DISCSLOT
		FRONTPANEL
FRONTPANEL	BUTTON
DETACHBUTTON		FOLD-DOWN
		RELEASEBUTTON
THEFT-DETERRENTLED		SPRING-LOADED
ANDRESETBUTTON
		FOLD-DOWN
(BEHINDFRONTPANEL
		FRONTPANEL
MOUNTINGPLATE)

SETTING THE CLOCK

1.Turn the vehicle ignition and radio “on”.

2.Momentarily press the DISP button ct ; the time display will appear. Press and hold the DISP button for approximately 5 seconds (until the time display begins to flash).

3.While the display is flashing, press the Up TUNing button ( ) to adjust the hours and the Down TUNing button ( ) to adjust the minutes to the correct time.

NOTE: The clock display is based on a 24-hour day; AM = 1 AM to 12 Noon, while PM = 1 PM (13) to 12 Midnight (24).

4.Five seconds after the last hour or minute adjustment is made, the time will be set in the unit; the adjusted time display will stop flashing, and normal tuner operation will resume with the station frequency displayed.

CD PLAYER ERROR CODES

If a problem should develop while operating the CD player, an error code (ER-1, ER-2, ER-3, etc.) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player. If an error code should appear, try ejecting and re-loading the disc into the player. While the disc is out of the unit, make sure it is clean, undamaged, and loaded correctly (label surface up). You may also try activating the RESET button dp on the unit, but this will also erase the time and pre-set memories.

If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.

OPERA

TING

INSTRUCT

IONS/

SET

T

ING

THE

CLOCK/

ERROR CODES

11