|
| LCD Error Codes |
|
|
|
Error | Description | Corrective action |
|
|
|
| PARAMETER > LIMIT. | Make sure the library and tape drives are not |
| Firmware error. | being used by any host, then press >5HVHW@ on |
|
| the operator panel. |
71 |
| If the error persists, contact your service |
|
| provider. You may be asked to supply a |
|
| diagnostic listing, and you may need new |
|
| firmware. |
|
|
|
| FRONT DOOR OPEN. The | Close and lock the door. |
| front door is open or the door | If the error still appears, make sure the library |
| solenoid is malfunctioning. | |
| and tape drives are not being used by any | |
72 |
| |
| host, then press >5HVHW@ on the operator panel. | |
|
| |
|
| If the error persists, contact your service |
|
| provider. |
|
|
|
| S SERVO TIMEOUT. The CHM | Open the door and look for anything that |
| could not reach its destination | might be obstructing the CHM along its short |
| along the short axis. | axis. |
73 |
| Make sure the library and tape drives are not |
|
| being used by any host, then press >5HVHW@ on |
|
| the operator panel. If the error persists, |
|
| contact your service provider. |
|
|
|
| INTERNAL S/W ERROR. | Make sure the library and tape drives are not |
| Firmware error. | being used by any host, then press >5HVHW@ on |
|
| the operator panel. |
75 |
| If the error persists, contact your service |
|
| provider. You may be asked to supply a |
|
| Diagnostic listing, and you may need new |
|
| firmware. |
|
|
|
| POS ERROR TIMEOUT. The | Open the door and look for anything that |
| CHM could not reach its | might be obstructing the CHM along its long |
| destination along the long | axis. |
76 | axis. | Make sure the library and tape drives are not |
|
| being used by any host, then press >5HVHW@ on |
|
| the operator panel. If the error persists, |
|
| contact your service provider. |
|
|
|
Installation and Operation | 165 |
