Chapter 7
➤Important If you connect a serial port to an Eliant 820 tape drive, you may interrupt any SCSI commands being sent to that drive from the application software.
5.When you have selected the option you want, press >(QWHU@. The library configures the port and displays a confirmation message. Press >(VFDSH@ to exit this message.
6.Press >@ to select a baud rate for the port and press >(QWHU@. The library assigns the baud rate and an asterisk (*) indicates the current connection.
Note: Use 9600 baud to communicate with the tape drive.
If you connected to a tape drive to perform tape drive diagnostics, be aware that the library changes back to the default setting, Diag Console, after the library door has been opened and closed or after the library has been reset.
➤Important If you attempt to exit the Config Port menu while the library is still connected to a tape drive, the library displays a message that instructs you to change the port setting back to Diag Console.
126 | Exabyte 440 and Exabyte 480 |
