Appendix E

Removing the library

To remove the library from a rack:

1.Extend the extension support legs on the rack.

2.Remove the air filter grilles from the front of the library by lifting on the outside edges and pulling the grilles away from the library.

3.Use a T-25 TORX driver to remove the two pan head screws that secure the library to the rack, as shown in the following figure. (Aclip nut may have been installed over the screw hole on the rack.)

178

Exabyte 440 and Exabyte 480

Page 192
Image 192
Exabyte 480, 440 manual Removing the library