Exabyte 480, 440 manual DMA CH Timeout

Appendix C

Error	Description	Corrective action
	NO LABEL. The bar code	If present, this error appears on the Label Info
60	scanner could not read the bar	screen. If the cartridge does not have a label,
	code label because there was	place a label on the cartridge. If the cartridge
	no label on the cartridge.	does have a label, reposition or replace it. If
		the error persists, contact your service
	READ ERROR. The bar code
		provider.
	scanner could not read the bar
61
	code label because the label
	was unreadable.
	NOT PRESENT. The bar code	If present, this error appears on the Label Info
	scanner could not read the bar	screen. If necessary, install a data cartridge
62	code labels because there	magazine.
	was no data cartridge
	magazine present.
	DMA OVERRUN. The bar code	If present, this error appears on the Label Info
	scanner could not read the bar	screen. Make sure the library and tape drives
65	code label because a Direct	are not being used by any host, then press
	Memory Access overrun	>5HVHW@ on the operator panel.
	occurred.	If the error persists, contact your service
		provider.
67	DMA CH. 2 TIMEOUT.
	Controller board error.
	LABEL UPSIDE DOWN. The	If present, this error appears on the Label Info
	bar code scanner could not	screen. Remove the label and reposition it on
69	read the bar code label	the cartridge. If the label is affixed correctly,
	because the label is upside	contact your service provider.
	down.
	L SERVO TIMEOUT. The CHM	Open the door and look for anything that
	could not reach its destination	might be obstructing the CHM along its long
	along the long axis.	axis.
70		Make sure the library and tape drives are not
		being used by any host, then press >5HVHW@￿on
		the operator panel. If the error persists,
		contact your service provider.

164 Exabyte 440 and Exabyte 480