Chapter 2
Connecting the narrow library to the SCSI bus
Narrow SCSI libraries have eight connectors and can operate on up to four SCSI buses. The library and Drive 1 share connectors and must operate on the same SCSI bus. Drives 2 through 4 can operate on individual buses.
To connect the narrow library to the SCSI bus:
1.Connect the library to the SCSI bus, using the connector assignments shown in the following figure.
2.Install SCSI cables as required to connect the library devices to the other devices on the SCSI bus.
38 | Exabyte 440 and Exabyte 480 |
