|
| Tape Drive Operation |
|
|
|
|
|
Drive Status screen (continued) |
| ||
|
|
|
|
Occupied |
| 0 – There is no cartridge loaded in the tape drive. |
|
|
| 1 – There is currently a cartridge loaded in the tape drive. |
|
|
|
|
|
Occ Valid |
| 0 – The door has been opened or some other interruption has |
|
|
| occurred so the occupied information may not be reliable. |
|
|
| 1 – The occupied information is reliable. |
|
|
|
|
|
|
| The following table shows additional fields on the Mammoth |
|
|
| Drive Status screen. |
|
|
|
|
|
Mammoth Drive Status |
| ||
|
|
|
|
Cart | Displays the status of a data cartridge, if any, in this tape drive. |
| |
| Loaded – A cartridge is in the tape drive and the tape is loaded into the |
| |
|
| tape path. |
|
| Loading – A cartridge is being loaded into the tape drive. |
| |
| Unloading – A cartridge is being unloaded from the tape drive. |
| |
| Present – A cartridge is in the tape drive, but the tape is not loaded in |
| |
|
| the tape path. |
|
| Empty – The tape drive does not contain a cartridge. |
| |
|
|
| |
Tape left | Displays how much tape is left, in megabytes, on the cartridge currently |
| |
| in the tape drive. |
| |
|
|
| |
Tape size | Displays the total amount of tape, in megabytes, on the cartridge |
| |
| currently in the tape drive. |
| |
|
|
| |
Tape fmt | Displays the data format of the cartridge currently in the tape drive. |
| |
|
|
| |
PO Sec | Displays the |
| |
|
|
| |
Mo. Sec | Displays the tape motion seconds. |
| |
|
|
| |
Serial | Displays the tape drive’s serial number. |
| |
|
|
| |
BOOT | Displays the code level of the tape drive’s boot ROM. |
| |
|
|
| |
FLASH | Displays the code level of the tape drive’s flash EPROM. |
| |
|
|
|
|
Installation and Operation | 91 |
