
Chapter 2
Step 2 – Obtain accessories and equipment
Make certain you have all the accessories and equipment for library operation, as indicated in the table below. Many of these items are included in the library accessories box (a separate box at the top of the carton).
Required accessories and equipment
Power cord | Included with the library. | |
| (Page 147 provides power cord | |
| specifications for other voltages | |
| and international use.) | |
|
| |
Two keys for the front door | Included with the library. | |
|
| |
Jumpers for connecting the | Included with the library (three | |
library and tape drives to a single | for narrow SCSI libraries and four | |
SCSI bus. | for wide SCSI libraries). | |
|
| |
Twelve screws and ten clip nuts | Included with | |
(see page 17 for specific sizes) | libraries. | |
|
| |
Two slide rails |
| |
|
| |
SCSI cables | If these items are not included | |
| with the library, contact Exabyte | |
SCSI terminator(s) (required if | ||
to purchase them. If you want to | ||
the library or one of the tape | ||
use your own, see page 148 for | ||
drives is the last device on the | ||
specifications. Visit the Exabyte | ||
bus) | ||
web site (www.exabyte.com) for | ||
| ||
| a list of approved vendors. | |
|
| |
Data cartridges and cleaning | If cartridges are not included with | |
cartridges | the library, contact Exabyte to | |
| purchase them. If you want to | |
| use your own, refer to page 71 | |
| for appropriate data cartridges | |
| and to page 85 for appropriate | |
| cleaning cartridges. | |
|
|
12 | Exabyte 440 and Exabyte 480 |