Chapter 7
Diagnostic | Description | Additional instructions |
test |
|
|
|
|
|
Scan | Scans all of the elements. | After the system scans all the elements, |
|
| it stores the data in the cartridge |
|
| inventory and displays any scan errors on |
|
| the Label Information screen (see |
|
| page 108). |
|
|
|
Scan with | Scans a range of bar code | When you select Scan with Range, the |
Range | labels. | Set Scan Start screen appears. Press >@ |
|
| or >@ to specify an element index where |
|
| you want the scanner to begin, and press |
|
| >(QWHU@. The Set Scan Stop screen appears. |
|
| Press >@ or >@ to specify an index where |
|
| you want the scanner to stop, and press |
|
| >(QWHU@. After the system scans the labels, it |
|
| stores the data in the cartridge inventory |
|
| and displays any scan errors on the Label |
|
| Information screen (see page 108). |
|
|
|
Home | Causes the gripper to move to |
|
Gripper | its home position (open). This |
|
| test also recalibrates the |
|
| home or zero position for the |
|
| gripper. |
|
|
|
|
Home | Causes the CHM to move in |
|
CHM | and out on the short axis, |
|
| move up and down on the |
|
| long axis, rotate the drum |
|
| assembly to its home position |
|
| (with cartridge magazine 0 to |
|
| the front), and open and close |
|
| the gripper. |
|
| This test also recalibrates the |
|
| home or zero position for the |
|
| long axis, the short axis, the |
|
| gripper, and the drum. |
|
|
|
|
122 | Exabyte 440 and Exabyte 480 |
