Exabyte 480, 440 manual LCD Interface mode, Pin and 25-Pin Port modes or 25/ 9 Pin mode

Chapter 3

LCD Interface mode

When the library is operating in LCD Interface mode, you can control the motions of the CHM from the operator panel.

Note: You can use many operator panel features without changing to LCD Interface mode. LCD Interface mode is required only when you want to control the motions of the CHM from the operator panel.

9-Pin and 25-Pin Port modes or 25/ 9 Pin mode

When the library is operating in a serial port mode (9-Pin or 25-Pin Port mode for narrow libraries; 25/9 Pin Port mode for wide libraries), you can control the motions of the CHM from a remote console program connected to the library’s 9-pin or 25-pin port.

Note: Use the 9-Pin, 25-Pin, or 25/9 Pin mode to control CHM motion only. You do not need to change the control mode to access a tape drive’s serial port.

68 Exabyte 440 and Exabyte 480