Hardware Installation
To prepare and install cartridges:
1.Affix a bar code label to each cartridge by positioning the label as shown in the following figure, using the recessed area on the cartridge for guidance. Make sure you orient the label correctly.
For information on how to prepare bar code labels, refer to the Exabyte Bar Code Label Specification for 8mm Cartridges.
➤Important If you remove a bar code label from a cartridge without replacing it, make sure you clean the label area thoroughly. Bar code labels can leave adhesive on the label area, which may cause the cartridge to stick to the gripper.
Installation and Operation | 27 |
