Configuration
Set Time
The Set Time option allows you to set the time that is shown on the library’s Main Screen and Command History screen (see page 106). To set the time:
1.From the Configuration Menu, select Set Time. The following screen appears:
S e t H H : M M : S S
T i m e : 2 0 : 2 2 : 0 9
− →
↓
2.Use 4 and 6 to toggle through the selections under HH (hours), MM (minutes), and SS (seconds). Use and 0 to toggle between the columns.
3.Press >(QWHU@ to save your changes and exit the Set Time screen.
Installation and Operation | 57 |