|
| LCD Error Codes | |
|
|
| |
Error | Description | Corrective action | |
|
|
| |
| CANNOT LOAD DRIVE. The | Open the door and look for anything that | |
| CHM could not load the | might be obstructing the CHM along its short | |
| cartridge into the tape drive. | axis. | |
| (It could not move in far | Make sure that a cartridge is not already | |
| enough on the short axis.) | ||
| loaded in the tape drive. | ||
|
| ||
38 |
| Make sure that the flap on the cartridge is | |
|
| closed. | |
|
| Make sure the library and tape drives are not | |
|
| being used by any host, then press >5HVHW@ on | |
|
| the operator panel. If the error persists, | |
|
| contact your service provider. | |
|
|
| |
| L AXIS DOES NOT MOVE. The | Open the door and look for anything that | |
40 | CHM could not move along | might be obstructing the CHM along its long | |
| the long axis. | axis. | |
|
| Make sure the library and tape drives are not | |
| L AXIS FAILED HOME. The | ||
| being used by any host, then press >5HVHW@on | ||
41 | CHM could not return to the | ||
the operator panel. If the error persists, | |||
home position on the long | |||
| contact your service provider. | ||
| axis. | ||
|
| ||
|
|
| |
| L LM629 RESET FAIL. The | Make sure the library and tape drives are not | |
46 | library could not reset the | being used by any host, then press >5HVHW@ on | |
servo chip for the long axis. | the operator panel. If the error persists, | ||
| |||
|
| contact your service provider. | |
|
|
| |
| D AXIS DOES NOT MOVE. | Open the door and look for any obstructions | |
50 | The drum could not move on | around the drum. If there are no obstructions, | |
| its axis. | contact your service provider. | |
|
|
| |
| D AXIS FAILED HOME. The | Contact your service provider. | |
51 | library could not determine |
| |
the home position for the |
| ||
|
| ||
| drum. |
| |
|
|
|
Installation and Operation | 163 |
