Chapter 2

3.Adjust the distance between the mounting brackets on each side of the cabinet to 17 5 8 inches (44.8 cm), as shown in the following figure. Measure both the front and the back.

4.Use a T-25 TORX screwdriver to tighten the screws to 12.0 in-lbs (13.8 kg-cm) of torque.

Installing the library into a rack

To install the library into a rack:

1.Extend the extension support legs on the rack.

20

Exabyte 440 and Exabyte 480

Page 34
Image 34
Exabyte 480, 440 manual Installing the library into a rack