Chapter 9

Replacing a tape drive (or drive blank)

You can install an Exabyte Mammoth or Eliant 820 tape drive into your library.

Important You must purchase the tape drive pre-installed in the carrier.

You cannot combine Exabyte Mammoth tape drives with any other type of drive in the same library. However, if you already own an older model library that contains Exabyte 8505XL tape drives, you can combine them with Eliant 820 tape drives.

Note: If you want to upgrade a library containing Eliant 820 or Exabyte 8505XL tape drives to Exabyte Mammoth tape drives, you must obtain an upgrade kit from Exabyte.

Using drive blanks

If you are using fewer than four tape drives, you must install a drive blank in each of the unused drive carrier slots. You cannot operate the library with empty drive carrier slots.

If your library has a narrow SCSI configuration, use the narrow SCSI drive blank. If your library has a wide SCSI configuration, use the wide SCSI drive blank.

Note: The library is shipped with one extra drive blank in the accessory box.

140

Exabyte 440 and Exabyte 480

Page 154
Image 154
Exabyte 480, 440 manual Replacing a tape drive or drive blank, Using drive blanks