AM antenna connections

Do not connect the AC power cord until all other connections have been made.

AM antenna connections

Connecting the Speakers and Subwoofer

 

English

AM

Connecting the Speakers and Subwoofer EXT

AM

LOOP

FM 75Connecting the speakers

COAXIAL

ANTENNA

AM Loop Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

You can connect five speakers (a pair of front speakers, a center speaker, and a pair of surround speakers) and a subwoofer.

CAUTIONS:

Use only the speakers of the SPEAKER IMPEDANCE indicated by the speaker terminals.

Do not connect more than one speaker to each speaker terminal.

Connecting the speakers

1

2

3

4

 

LEFT

LEFT

 

LEFT

 

+

 

RIGHT

+

RIGHT

+

1

2

3

Outdoor single vinyl-covered wire (not supplied)

Turn the loop until you have the best reception.

Notes:

• If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as illustrated.

Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception.

If reception is poor, connect an outdoor single vinyl-covered wire (not supplied) to the AM EXT terminal. (Keep the AM loop antenna connected.)

1Twist and remove the insulation at the end of each speaker cord.

2Press and hold the clamp of the speaker terminal.

3Insert the speaker cord.

4Release the finger from the clamp.

For each speaker (except for a subwoofer), connect the (+) and

(–)terminals on the rear panel to the (+) and (–) terminals marked on the speakers.

 

 

 

 

:

IMPEDANCE

 

 

 

CAUTION

 

 

 

 

 

SPEAKER16

 

 

 

 

 

 

 

 

8

 

 

 

 

FRONT

 

 

 

 

SURROUND

SPEAKERS

+

 

 

 

 

 

 

 

 

 

 

 

CENTER

 

 

 

 

 

 

 

 

 

SPEAKER

 

 

 

 

 

+

To left

front speaker

 

 

To left surround

To center speaker

speaker

To right front speaker

 

To right surround speaker

 

5

Page 7
Image 7
JVC LVT1290-007A manual Connecting the Speakers and Subwoofer, 2Press and hold the clamp of the speaker terminal, English