Before You Start Playing
■Using the Music Holders
You can use the holders to hold pages in place. When not using the holders, leave them folded down.
*
fig.mu_stand4
■Using the Headphones Hook
Whenever you are not using the headphones, you can hang them on the headphone hook at the lower left of the HP103.
Attaching the Headphone Hook
Press and twist the headphone hook included with the HP103 into the hole in the bottom of the HP103 (refer to the figure below). Turn the wing nut of headphone hook to secure the headphone hook.
Connecting Headphones
The HP103 has two jacks for plugging in headphones. This allows two people to listen through headphones simultaneously, making it very useful for lessons and when performing piano pieces for four hands. Additionally, this allows you to play without having to worry about bothering others around you, even at night.
Plug the headphones into the Phones jack located at the
bottom left of the piano.
When headphones are connected, the [
(Headphones)] indicator (p. 8) lights up, and sounds stop playing from the speakers of the HP103.
The headphone volume is adjusted by the [Volume] knob (p. 12) of the HP103.
fig.00-04.e
Phones jack x 2
NOTE
Use Stereo headphones.
Some notes on using headphones
•To prevent damage to the cord, handle the headphones only by the headset or the plug.
•Connecting the headphones when the volume of connected equipment is turned up may result in damage to the headphones. Lower the volume on the HP103 before plugging in the headphones.
•Listening at excessively high volume levels will not only damage the headphones, but may also cause hearing loss. Use the headphones at a moderate volume level.
Wing Nut
Headphone Hook |
Turning the Power On and Off
NOTE
Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
To turn the power on, turn the [Volume] knob all the
way down, and then press the [Power On] switch.
The power will turn on, and the Power indicator at the left front of the HP103 will light.
After a few seconds, you will be able to play the keyboard to produce sound.
Use the [Volume] knob to adjust the volume.
*This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will
operate normally.
fig.00-06.e
Power On
Power Indicator
To turn the power off, turn the [Volume] knob all the
way to the left, and press the [Power On] switch.
The Power indicator at the left front of the HP103 will go dark, and the power will be turned off.
*If you need to turn off the power completely, first turn off the [POWER] switch, then unplug the power cord from the power outlet. Refer to “Power Supply” (p. 5).
11
