Roland HP103 owner manual To exit the function, press the Split button, Fig.panel3-1

Chapter 2. Performance

Splitting the Keyboard Into Two Sections for Four-Hand Performances (Twin Piano Mode)

You can divide the keyboard into two separate sections, allowing two people to

perform in the same registers.

C1 C2 C3 C4

C3 C4 C5 C6

C5 C6 C7 C8

C3 C4 C5 C6

1 While holding down the [Split] button and press the [Piano] button.

The [Split] button’s indicator will light, and Twin Piano Mode is switched on.

fig.panel3-1

1

The following occur when Twin Piano Mode is switched on:

•The keyboard is divided into two separate sections, and the pitch changes.

•The right pedal now functions as the damper pedal for the right keyboard section, and the left pedal functions as the damper pedal for the left keyboard section.

•The center pedal now functions as the Sostenuto pedal for the right keyboard section.

•If recording is in progress or the instrument is in recording standby, recording is stopped or recording standby is cancelled. The [Rec] button is disabled while Twin Piano Mode is active.

•If the Split function happens to be on, it is switched off.

•The same tone and effects are used on both the left and right sides. If the piano is in Split Play before switching Twin Piano Mode on, then the tone selected for the right hand in Split Play is used.

* The damper resonance function is not operational in Twin Piano Mode.

2 To exit the function, press the [Split] button.

27