Roland HP103 Adjusting the Sound’s Volume and Brilliance, About the Pedals, About the Adjuster

Models: HP103

1 56
Download 56 pages 25.53 Kb
Page 12
Image 12

Before You Start Playing

Adjusting the Sound’s Volume and Brilliance

Turn the [Volume] knob to adjust the overall volume.

Press the [Brilliance] button to adjust the brightness of the sound.

Select one of the three available settings to obtain the

desired brilliance.

[Brilliance]

Off

Lit in red

Lit in

button’s indicator

green

 

 

 

 

 

 

Brilliance

Medium

Mellow

Bright

 

 

 

 

fig.00-07.e

Min Max

About the Pedals

The pedals have the following functions, and are used mainly for piano performance.

fig.00-08.e

Soft Pedal

Damper Pedal

Sostenuto Pedal

Damper pedal (right pedal)

While this pedal is pressed, notes will be sustained even after you take your fingers off the keys.

On an acoustic piano, holding down the damper pedal will allow the remaining strings to resonate in sympathy with the sounds that you played from the keyboard, adding a rich resonance.

The HP103 simulates this damper resonance.

You can change the amount of resonance applied with the damper pedal. Please refer to “Changing the Damper Pedal’s Resonance” (p. 35).

Sostenuto pedal (center pedal)

This pedal sustains only the sounds of the keys that were already played when you pressed the pedal.

Soft pedal (left pedal)

When you hold down this pedal and play the keyboard, the sound will have a softer tone.

About the Adjuster

When you move the HP103 or if you feel that the pedals are unstable, adjust the adjuster located below the pedals as follows.

Rotate the adjuster to lower it so that it is in firm contact with the floor. If there is a gap between the pedals and the floor, the pedals may be damaged. In particular when placing the instrument on carpet, adjust this so

that the pedals firmly contact the floor.

fig.00-09.j

Adjuster

If the adjuster is difficult to turn, have one person lift either the left or right side of the stand to make it easier for another person to turn the adjuster and make the adjustment.

NOTE

After adjusting the adjuster, press the pedals, and if the front board moves, turn the adjuster further so that it makes firm contact with the floor.

NOTE

Always readjust the adjuster after moving the piano.

12

Page 12
Image 12
Roland HP103 owner manual Adjusting the Sound’s Volume and Brilliance, About the Pedals, About the Adjuster