English |
| Error Display | Cause | Measure |
| ERROR 2 | During the iPod analyse, | Switch to the iPod mode again, reset the unit and | |
|
| |||
|
| (iPod mode) | failure to achieve the iPod | iPod. |
|
|
| state or initialize the iPod |
|
|
|
| driver, unusual detection of |
|
|
|
| iPod driver. |
|
|
|
|
|
|
| USB/iPod | ERROR 3 | During the playback, failure | Switch to the iPod mode again. |
| (iPod mode) | to achieve the iPod state, |
| |
|
|
| ||
|
|
| unusual detection of iPod |
|
|
|
| driver. |
|
|
|
|
|
|
|
| ERROR 5 | The connected iPod is not | Disconnect and reconnect the iPod. |
|
| (iPod mode) | recognized. |
|
|
|
|
|
|
|
| ERROR 7 | USB memory device format | Disconnect and reconnect USB memory device. If |
|
| (USB mode) | error. | device still cannot be recognized, try replacing with |
|
|
|
| different USB memory device. |
|
|
|
|
|
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your dealer.
10. SPECIFICATIONS
FM Tuner
Frequency Range: 87.9 MHz to 107.9 MHz
Usable Sensitivity: 9 dBf
50dB Quieting Sensitivity: 15 dBf
Alternate Channel Selectivity: 70 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response (±3 dB): 30 Hz to 15 kHz
AM Tuner
Frequency Range: 530 kHz to 1710 kHz
Usable Sensitivity: 25 μV
CD Player
System: Compact disc digital audio system
Usable Discs: Compact disc
Frequency Response (±1 dB): 5 Hz to 20 kHz
Dynamic Range (1 kHz): 85 dB
Harmonic Distortion: 0.01%
Audio
Maximum Power Output: 200 W (50 W ✕ 4 ch)
Bass Control Action (100 Hz): +14 dB,
Treble Control Action (10 kHz): +14 dB,
Line Output Level (CD 1 kHz): 1.8 V
General
Power Supply Voltage:
14.4V DC (10.8 to 15.6 V allowable), negative ground
Current Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 Ω to 8 Ω allowable)
Weight / Source unit: 2.69 lb. (1.22 kg) Weight / Remote control unit:
1.41oz. (40 g) (including battery) Dimensions / Source unit:
7" (Width) ✕ 2" (Height) ✕
Dimensions / Remote control unit:
[44 (W) ✕ 113 (H) ✕ 11 (D) mm]
Power Output :
20 W RMS x 4 Channels at 4
and 1 % THD+N
Signal to Noise Ratio:
88 dBA (reference: 1 W into 4 )
Note:
•Specifications and design are subject to change without notice for further improvement.
22 CZ209