English
14 CZ209
Operations Common to Each Mode●Setting the clock
2-1. Select “CLOCK”.
3-1. Press the [ ] button
3-2. Press [x] or [v] to select the hour or
minute.
3-3. Turn the [ROTARY] knob to set the time.
∗The clock is displayed in 12-hour format.
3-4. Press the [ ] button to store the time in
memory and return to the previous mode.
Note:
•You cannot set the clock when i t is displayed
with only the car’s ignition on. If the car’s battery
dies or is removed, or the unit is removed, the
clock will be reset. If another button/operation is
selected while setting the clock, the clock set
mode is canceled.
●Displaying the settings
You can see the state of current settings at any
operation mode.
2-1. Select “SETTINGS”.
3-1. Turn the [ROTARY] knob to display the
current settings.
∗When the setting is selected, the current
state will be displayed after 1 second.
●Turning the screen saver on/off
This unit has a screen saver function in which
various patterns and random characters can be
displayed on the operation status indication
area. This function can be turned on/off. If a
button is pressed while the screen saver is on,
the corresponding operation display is shown
for about 30 seconds, and then the display
returns to the screen saver.
∗The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
●Setting title scroll method
Set how to scroll in CD-TEXT and MP3/WMA
titles.
∗The factory default setting is “ON”.
2-1. Select “SCROLL”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
•ON: Scroll automatically.
•OFF: Scroll 1 time only.
●Setting dimmer control
Dimmer control can be set “ON” or “OFF”.
∗The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
●Setting car speaker output for cell
phones
When the AUX input jack is used to connect an
AUX BLUETOOTH BB (BLT370) (sold
separately):
∗The factory default setting is “RIGHT”.
∗To output the telephone calls, set cell phone
interrupt to “ON”.
2-1. Select “TEL-SP”.
3-1. Turn the [ROTARY] knob to select “RIGHT”
or “LEFT”.
•RIGHT: Telephone calls can be heard on
the front right speaker connected to this
unit.
•LEFT: Telephone calls can be heard on
the front left speaker connected to this
unit.
To change settings
1. Press and hold the [DISP] button (1 sec.)
to switch to the adjustment display.
2. Press [x] or [v] to select the “ item
name” as follows:
“CLOCK” ↔ “SETTINGS” ↔ “SCRN SVR”
↔“SCROLL” ↔ “DIMMER” ↔ “TEL-SP”
↔ “TEL-SW”
∗The adjustment item will be displayed for 2
seconds before showing the desired value.
3. Turn the [ROTARY ] knob to select the
desired value.
∗When “ENT” is flashing in the display, press
the [ ] button to adjust setting value.
4. After completing settings, press the [DISP]
button to return to the previous mode.