Panasonic TH-50VX100E, TH-65VX100E Specifying the scaler, Select External scaler mode and set

Specifying the scaler

This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment.

The setting is valid with the following input signals.

1125 (1080) / 24p•25p•30p•50p•60p

1

2

3

4

Display the menu screen.					Signal
Select “Setup”.					Screensaver
			2 OK		Component/RGB-in select
Picture						RGB
					External scaler mode	Off
Setup
					Power save	Off
Pos. /Size
			1 select		Standby save	On
Sound
					Power management	Off
Select “External scaler mode” and set.					Auto power off	Off
					OSD design	Type1
					OSD position	Upper left
Signal			2 change		OSD Language	English (UK)
Screensaver
Component/RGB-in select			1 select
	RGB
		Off	On
External scaler mode	Off
Power save	Off	Off: Use the built-in scaler.
Standby save	On	On: Use an external scaler.
Power management	Off	Note:
Auto power off	Off
OSD design	Type1	Selecting “On” in this setting deactivates the following settings and
OSD position	Upper left	disables these operations.
OSD Language	English (UK)	Pos. /Size menu: H-Size, V-Size, 1:1 Pixel Mode, Display size
				(see page 30, 31)
		Picture menu:		Brightness, Colour, Hue, Sharpness, Memory save,
				Memory load (see page 21, 25, 26)
		Advanced settings: Cinema reality, Noise reduction (see page 23)
		Signal menu:		XGA Mode (see page 39)
		Options menu:		All Aspect (see page 41)
		ASPECT Controls (see page 17)
		“EXT. SCALER” is displayed in the menu screen to indicate that an
		external scaler is in use.

Normalise	EXT.SCALER
Picture Mode	Normal
Contrast	25
Brightness
Colour
Hue

Exit the menu. or

35